Mount Plus1056 VESA 200x200 Universal Adapter Plate for TV Mounts | Convert VESA 75x75, 100x100 Mount to Fit 200X100, 200x200 mm VESA Patterns | Includes Hardware Kit

Was able to mount this onto my 100x100 VESA pattern TV to make it fit on a mount that only supported larger VESA patterns. With the spacers and bolts included, it worked like a dream. I did go out to get some hex nuts, but that was just to make this work for my roundabout situation. For a basic mount conversion, this product includes everything you need.The material and build quality were excellent and sturdy.

I used this adapter plate successfully for two separate jobs: first, to attach a Samsung 43-inch TV (200-mm Vesa pattern) to a medium-duty Huanuo single-monitor mount (75-/100-mm Vesa pattern, 19.8-lb capacity), and subsequently to attach a 43-inch Sony 'Bravia 3' TV (200-mm Vesa pattern) on a heavy-duty Huanuo monitor mount (75-/100-mm Vesa pattern, 26.48-lb capacity). In both instances, the adapter plate worked fine to bridge the difference in Vesa patterns. It was very helpful that the Mount Plus adapter plate came with a variety of nuts, bolts, and spacers to attach things together. For the first job, I needed no additional hardware because the Mount Plus 1056 came with everything I needed and did not have already. In the second instance, I had to add four optional washers to the mount bolts that attach the adapter plate to the TV. (The Samsung and Sony TVs require different-sized bolts for mounting.) The adapter plate did its job perfectly each time. Great job, Mount Plus!Pro tip: If you use this Mount Plus adapter plate, attach it to your swivel mount first, taking care to put the screw heads toward the TV so they sit flush without touching the TV. Tighten the four nuts so the adapter plate is fully attached to your swivel mount. Next (finally), attach the adapter plate to your TV. Don't over-tighten the bolts or they may damage your TV/monitor. If you reverse the order and try to attach the adapter plate to your TV/monitor in the first step (before attaching the adapter plate to your mount), you will have trouble tightening the bolts that attach the adapter to your swivel mount because they will spin in place as you try to tighten the nuts. You must have a screw driver and a small wrench or pair of pliers to tighten the bolts that attach this adapter plate to your swivel mount. Good luck!

Exactly what I needed to mount my TV. It had all of the screws, spacers and bolts to complete the job. I was very pleased with my purchase.

This is a good 200x200 adapter plate to use, especially for the Samsung Odyssey Neo G7 43" monitor: it's rock solid and gets the job done. However, if you're using it with the VIVO STAND-V101E monitor arm, note that you won't be able to use the included flat-head screws that mount your actual VIVO plate to the adapter (the step needed before the entire plate assembly gets mounted to the VIVO arm). Those 5/8" long screws are too long and won't allow the VIVO plate/adapter plate to slide onto the arm bracket. You'll need to get the same screws at your local hardware store, but only 3/8” long. Then the locking nut can go on, leaving just enough room for the plates to slide onto the arm. After that, you're golden. This probably applies to any monitor arm with slide on bracket capabilities, but I can't speak to that, as all I had was the VIVO STAND-V101E setup, but you might want to review how your monitor arm works before getting this adapter plate.

i have a very old (and very tiny) samsung syncmaster b2230 that i love to death, but it only has 75x75mm vesa holes so that limits what mounts it can go on. i wanted to install it in my camp trailer, but the mount that came in it doesn't have the right holes....this plate has ALL the holes! it works perfect for adapting between vesa sizes and comes with spacers to give everything enough clearances.i did have to go to the hardware store to get appropriate screws for my tv tho (the ones included were slightly too big) and also shorter bolts to give me enough clearance on the adaption, but that's not too big a deal. it does the job of holding my weird little tv in my camp trailer without having to replace my existing mount so im happy lol

Sturdy. Correct size. Good value.

Adding a new TV monitor to an existing older wall mount required taking the new 8" Square mounting pattern and connecting it to the older 6" X 4" pattern wall plate. Even though the new TV was much larger than the old dog, it was also much lighter. So the <$10.00 adapter plate was a much better idea than a >$30.00 new adjustable wall mount. This switch was being made in a church vestry, so minding nickels and dimes was important. The hardware that came with the plate took care of connecting it to the old swing mount. The new monitor went up easily. Success - with minimal out-of-pocket cost. Win-Win