Seam Sealing Tape T-2000X – Hot Melt 3-Layer Waterproof – Iron On

Ordered to replace the seam tape on a Palm whitewater cag and Peak UK trousers. This stuff is excellent, the fabric backing and adhesion is superb. It takes a couple of seconds practice to get your iron to the right temp - circa Nylons level. When you do get the adhesive 'flowing' it forms a fantastic bond to the underlying material. Take your time with it, leave the iron over the tape for the full 10 seconds and you'll have watertight seams again. Hint #1 if you want to keep your iron and the adhesive separate, cut a 3cm strip of grease-proof paper and stick that over the tape to stop the adhesive making the iron sticky. Hint #2 when doing a longer strip, position the first couple of cm and 'dab' the iron on to just that point, then you can work away from a fixed point keeping the tape aligned over the seam.

I ordered this tape in order to replace the taped seams on a lightweight pair of over-trousers.There was very nearly enough tape for this purpose - I was surprised how the total seam length added up, so a couple more inches would have been good, but it didn't really matter.I found it best to use 6 to 8 inch sections of tape (easy to iron on), and to overlap a little bit at the joins.I used a medium-to-hot dry iron, and found the new tape very easy to put on.It seemed to stick straight away, and the over-trousers feel a lot better as a result of the repair.It was a much quicker job than I had imagined.I would recommend this product.

Excellent quality tape, was able to a good repair on a membrane waterproof jacket (Mountain Hardwear DryQ), using roughly this method: http://www.outdoorsmagic.com/hill-skills/how-to-repair-torn-waterproofs/6509.html. The images attached show an inner and outer patch applied to a tear in a pocket. Not obvious from photos but a layer in the tape melts and welds to the fabric of jacket. Use a cork matt to keep the repair area flat and test on some synthetic material first to get the iron temperature correct. Needs to be hot enough so that you can see molten glue at the edge of patch, but not hot enough to melt a nylon ribbon. Iron through baking paper to limit the temperature change.

I had a waterproof jacket where the sealing strip on the inside of the hood had delaminated. I purchased this tape to re-seal the seam. The tape worked exactly as claimed, being applied with a warm iron. The only problem I did have was due to the curvature of the hood seam, which made ironing along the seam tricky. I overcame this by cutting the tape into sections and then overlapping them to accommodate the shape of the head. This was not however the fault of the tape which adhered well even when overlapping. Several months on, it is still sticking well and the hood is still waterproof.

I bought this to repair the damaged (10 years old) seam sealing tape at my Dynesse Gore Tex motorbike jacket and trousers . The quality of the product is very good. I made the repair twice.The 1st time I applied it using the iron at a medium temperature by pressing it for about 5 sec but it didn't stick well. The 2nd time I applied it using the iron at a medium to high temperature (at the point where the iron starts to steam) by pressing it for 10 seconds until a little amount of the glue showed at the edges of the tape. By doing this, tape stuck very well and no water passed through during a rainy day I tested it.Unfortunately, because of the material feeling of the Gore Tex fabric (it has a silicon feel at touching) and the position of the fixed area ( inside of the arm where it folds) the tape after 10 days of everyday use, started to unstick lightly at specific areas, without loosing its waterproof abilities. Maybe it unstuck only at the edges.In my opinion, if the repair was at an another area of the jacket that doesn't fold all the time, it would probably had been stuck better, because at the Gore tex trousers it stuck very strong and until now it has no problem.Here and some photos of the repair. 1st photo is from the jacket arm, 2nd is from the trousers and the 3rd is from jacket after several days.So I will surely try again until I succeed the better result.I 'll give to this product a rate of 5 stars ( I was thinking to give 4), only because I think that maybe I didn't make a proper application.

Have just finished applying this tape to the seams of the flysheet of an old tent. The adhesive is hot melt and you can use a warm iron to apply it - I found that the 'Silk' setting and applied pressure for about 10 seconds, but be careful - not too hot. I applied the tape in short sections starting at the top, and am pleased wioth the end result, although I'll have to wait until I have the tent up in the rain to be sure.All in all I believe this to be a quality product, but it isn't cheap.

I bought it to repair the external pocket of my Columbia jacket that was completely separated from the jacket. I have to notice that it was my first aproach on that type of repairs. I just read the instructions that are extremely easy and I had an excellent result at once. I am absolutely satisfied and I can surely recommend this excellent product easy and straightforward hot melt solution.

Used this to fix the seams on a berghaus gortex paclite jacket. This is the third such jacket I've had which the neck seam had come away from. I was looking for a replacement again when I stumbled upon a reference to this tape. So far so good, been in a couple of showers since applying the tape and so far so good, it has stopped me having to replace an otherwise fully usable summer waterproof

Hatte einen Regenmantel für ein Kind genäht und mit diesem Band alle kritischen Stellen (Schulternähte, Kapuze usw) verklebt.Da der laminierte Stoff nicht eben billig ist, hatte ich erst Tests mit verschieden Temperaturen gemacht.Da ich nur auf sehr schmaler Stelle bügeln wollte, habe ich mir ein Folienbügeleisen mit Digitalanzeige gekauft.(Lohnt sich, weil ich noch weitere Regenmäntel geplant habe)Bei 120°C hat es bei mir wunderbar funktioniert. Der laminierte Stoff wird nicht beschädigt und es ist heiss genug um den Kleber zu verflüssigen, damit man ihn mit einer Linoleumrolle in die Naht drücken kann.

Das Aufbringen ist recht einfach, nur dort wo es um die Kurven geht ein bisschen kniffelig. Tipp: Ein bisschen mit der Temperatur des Bügeleisens herumspielen. Ich habe mit mittlerer Hitze angefangen und dann leicht erhöht. Mit der richtigen Einstellung geht es dann wirklich sehr viel einfacher. Zu erkennen, wenn sich der Kleber schneller verfüssigt und an den Seiten heraustritt.

la presentación pésima, Enrollado, en un cartón, sucio, sin cuidado alguno. y cuando muestro mi decepción, el fabricante, con una prepotencia BRITANICA, muy desagradable, me contentas que, que buscaba , que un articulo tan barato. Pues por lo menos lo que aparece en el su foto de presentación. aparte de que la cinta estaba doblada y con esas arrugas no hace bien su función.

Molto soddisfatta dell'acquistoHo potuto riparare una giacca in goretex le cui tasche , perdendo la termosaldatura sul fondo , erano inutilizzabili.Ho fatto uso di cartaforno per evitare di fare danni alla giacca , passando col ferro a media temperatura , la striscia si è termosaldata alla giacca in modo perfettoOttimo prodotto

Ich habe damit eine sich an allen möglichen Bündchen und Säumen auflösende Arcterix-3Lagen-Hardshelljacke gerettet, die mich in vollwertigem Ersatz mind. 300€ gekostet hätte. Bügeleisen kurz mit elektr. Bratenthermometer :-) geeicht (Synthetik 135-170°C) und nach 1,5h höchster Konzentration war es geschafft. Habe fast die ganze Rolle verarbeitet. Lässt sich mit etwas Übung auch in leichten Kurven verarbeiten. Der Kleber muss sichtbar schmelzen! Übung macht den Meister.

Habe das Band für das Abdichten der Nähte einer Bootsplane benutzt. Super Haftung nach den Aufbügeln .Einfach die Plane über ein Ärmel Bügelbrett ziehen und mit dem Bügeleisen bei mittlerer Hitze auf die Nähte von hinten aufbügeln und dann mit einem Maler Nahtroller festrollen.Dieses Band erfüllt seinen Zweck und ist voll das Geld werd.

Ho utilizzato il nastro per isolare le cuciture di una giacca. applicato col ferro da stiro e preso un la mano le lavorazioni sono abbastanza veloci.Non o ancora provato la tenuta ma per il memento sembra sia venuto un buon lavoro

Sinceramente devo aver letto, e pensavo fosse biadesivo. Errore mio. Però l'ho provato per giuntare due pezzi di cotone molto spesso e devo dire che lavora alla grande

Einfache u.leichte Anwendung. Einfach aufbügeln u.es hält super.Verwende es bei kleinen Löchern oder Rissen in Pferdedecken.Ich würde mir dieses Tape immer wieder kaufen.

Appena Usato x ri-nastrare pantaloni da sci alpinismo in gorotex salewa. Semplice da applicare con ferro da stiro . Spero sia durevole , per ora 4 stelle solo perché non ho ancora usato le braghe

Non raggiunge le aspettative tecniche che mi ero prefissato. Amazon Perfetta.

Das Band erfüllt seinen Zweck,hält wie Bombe 5 Sterne immer wieder gern,,, DANKEWichtig, man braucht ein Bügeleisen,also nicht vergessen!!!

Está bien para recuperar prendas de Goretex con pequeños rotos en las costuras. Cuesta un poco fijarla correctamente -he tenido que volver a pegarla un par de veces, pero es buen producto. Envío corecto.

Einfach in der Anwendung. Kleines Reisebügeleisen auf Stufe 2 bis 3 ca. Anfang Baumwolle gestellt und schon gehts los. Ca. 5 sec. auf den Stellen anwenden und es hält perfekt.

Super Qualität, prompteste Lieferung, überaus zufrieden, jederzeit wieder!